Bimetallic Barrel With 40% Tungsten Carbide Nickel-based Alloys DW-K3
The alloy contains at least 40% composition of tungsten carbide, which enables the barrel processes engineering plastics with up to 60% corrosive and reinforced additives.
DW-K3 Bimetallic barrel Cylinder with 40% Tungsten Carbide Nickel-based Alloys
In our DW-K2 alloys, the composition of WC (tungsten carbide) reaches 40% by the weight. Highest composition of tungsten carbide can go up to 45%
The Tungsten carbide is a compound composed of tungsten and carbon, with a molecular formula of WC and a molecular weight of 195.85. It is a black hexagonal crystal with a metallic luster and a hardness similar to diamond. It is a good conductor of electricity and heat. Tungsten carbide is insoluble in water, hydrochloric acid, and sulfuric acid, but easily soluble in mixed acids of nitric acid and hydrofluoric acid. Pure tungsten carbide is fragile, but adding a small amount of metals such as titanium and cobalt can reduce its brittleness. Tungsten carbide used as a cutting tool for steel is often added with titanium carbide, tantalum carbide, or their mixtures to enhance its blast resistance. The chemical properties of tungsten carbide are stable. Tungsten carbide powder is used in the production of hard alloy materials.

Technical Parameters
Product Name : Iron-based Bimetallic Barrel
Material: 42CrMo + DW-K3 Alloy
Suitable Machine: Injection / Extrusion / Blowing ...
Available Size: Φ < 500mm, L < 8,000mm
Process Method: Centrifugal Casting
Surface Hardness: 58-62 HRC
Surface Roughness: < Ra 0.8
Screw Straightness: < 0.02mm/m
Advantages
By casting and sintering high quality alloy powder on barrel inside surface with thickness1.5-2.0mm, screws can get higher performance in both wearing & corrosion resistant performance.
Applications
General plastics & engineering plastics with up to 60% glass fibre filling.
Comparison of DW-K Series Alloy
At this stage, we have DW-K-1, DW-K-2 and DW-K-3 alloy types and treatments for wear fighting.
|
Type |
Components |
Hardness (HRC) |
Abrasive Resistance |
Corrosion Resistance |
Applications |
|
DW-K1 |
Fe, Cr, Ni |
56 – 60 |
x |
x |
Recycling & engineering plastics, reinforced additives less than 30%. |
|
DW-K2 |
Ni, W, Cr |
58 – 62 |
xx |
xx |
Moderate corrosive, reinforced additives less than 50% |
|
DW-K3 |
Ni, W, Cr |
60 – 64 |
xxx |
xx |
High abrasive and moderate corrosive plastics |
Suitability: (x good) to (xxx excellent).
|
Type |
Ingredients (% by weight) |
||||||||
|
Cr |
C |
Fe |
B |
Si |
W * |
Mn |
Ni |
Others |
|
|
DW-K1 |
8 |
1.2 |
Bal |
4.3 |
4 |
/ |
0.65 |
10.8 |
< 1.0 |
|
DW-K2 |
8 |
1.4 |
5 |
4 |
3.3 |
16.5 |
0.5 |
Bal |
< 1.0 |
|
DW-K3 |
8 |
1.4 |
5 |
4 |
3.3 |
40 |
0.5 |
Bal |
< 1.0 |
*Highest composition of tungsten carbide can go up to 45%, which enables the barrels have 5 times wear-resistance capability than normal Bimetallic Barrels and up to 60% glass fibre filling in general & engineering plastics materials.


Hot Tags: Bimetallic Barrel With 40% Tungsten Carbide Nickel-based Alloys DW-K3, China Bimetallic Barrel With 40% Tungsten Carbide Nickel-based Alloys DW-K3 manufacturers, suppliers, factory, bimetallic barrel, bimetallic barrel cylinder with centrifugal casting iron based alloys dw k1
You Might Also Like
Send Inquiry














